Baumuller b maXX BM1000, Руководство пользователя

Страница: 65 / 176

Installation
Manual b maXX
®
BM1000
Document No. 5.07003.04
65
of 174
6
6.11.3 Analog input terminals (AVI, ACI, ACM)
†
Analog input signals are easily affected by external noise. Use shielded wiring and
keep it as short as possible (< 20 m) with proper grounding. If the noise is inductive,
connecting the shield to terminal ACM can bring improvement.
†
If the analog input signals are affected by noise from the device, please connect a ca-
pacitor (0.1 F and above) and ferrite core as indicated in the following diagrams:
Figure 37: Analog input terminals
6.11.4 Multi-function-inputs (MI1 to MI6, DCM)
†
When using contacts or switches to control the digital inputs, please use high quality
components to avoid contact bounce.
6.11.5 Multi-function output (MO1, MCM)
†
Make sure to connect the digital outputs to the right polarity, see wiring diagrams.
†
When connecting a relay to the digital outputs, connect a surge absorber or flyback di-
ode across the coil and check the polarity.
ferrite core
NOTE
Wind each wires 3 times or more around the core
NOTE
The multi-function inputs MI1 and MI2 are used for operation commands (e.g. STOP, RUN,
FWD, REV) only.