Cordless Line Trimmer
5
2. Before starting the grass trimmer for the first time, check that the nylon lines touch or pass over the wire
cutting blade. If they are not long enough:
a. Press the spool button (FIG. 5).
b. Pull more nylon wire to lengthen (FIG. 5).
3. The lengthened nylon line will be cut to size automatically by the wire cutting blade once the lawn trimmer is
turned on.
4. During use, the nylon line will become shortened or worn. To automatically lengthen or advance the nylon
cutting line, tap the spool button lightly on ground (while the unit is running) (FIG. 6).
These operations should be repeated a few times before starting work to make sure that everything is
functioning properly and to familiarise yourself with the grass trimmer. Start off slowly, when you have gained
experience, you will be able to use the grass trimmer to its full potential.
5. The length of the grass trimmer can be infinitely varied and therefore adjusted to your individual height (FIG.
7):
a. Hold the tube with one hand, then loosen the adjusting thread.
b. Set the handle to the correct length and tighten the adjusting thread.
