Cordless Line Trimmer
6
Replacing the Spool of the Nylon Line
1. Switch off the trimmer and wait for all parts to stop moving.
2. Remove the battery pack.
3. Remove the spool assembly from the trimmer. To do so, hold the outer ribbed part of the assembly with one
hand, while pushing down and turning the spool head with the other to unlock it (FIG. 8). The spool carrier
and spool will now disassemble easily.
NOTE
: There is a spring inside the head that could easily be lost. Ensure that it is put in a safe place.
4. Choose either OPTION 1 or OPTION 2 below for spool or line replacement.
5. Insert the line through the eyelet in the spool carrier and slide the spool into it (FIG. 9).
6. Making sure to insert the spring, assemble the spool and spool carrier back onto the trimmer. To do so, push
the head on and turn it clockwise until it locks (FIG. 10).