Baumr-AG 660EX Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 36

Baumr-AG 660EX Скачать руководство пользователя страница 8

15. Do not tilt the product when starting the engine or switching on the engine,

except if the product has to be tilted for starting. In this case, do not tilt it more

than absolutely necessary and lift only the part which is away from the

operator.

16. Do not start the engine when standing in front of the discharge chute.
17. Do not put hands or feet near or under rotating parts. Keep clear of the

discharge opening at all times.

18. Never pick up or carry a product while the engine is running.
19. Stop the engine and disconnect the spark plug connector, make sure that all

moving parts have come to a complete stop and, where a key is fitted remove

the key:

  before clearing blockages or unclogging chute,
  before checking, cleaning or working on the product,
  after striking a foreign object. Inspect the product for damage • and make

repairs before restarting and operating the product,

if the product starts to vibrate abnormally (check immediately).

20. Stop the engine and disconnect the spark plug connector, make sure that all

moving parts have come to a complete stop and, where a key is fitted remove

the key:

whenever you leave the product,
before refuelling.

21. Reduce the throttle setting during engine shut down and, if the engine is

provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

22. Go slow when using a trailing seat.
23. Never touch the exhaust, exhaust guard or cooling fins when the engine is hot.
24. Never carelessly touch the product, you can burn yourself. While the product

is in operation or shortly thereafter, its parts such as the exhaust pipe, engine,

and other surfaces are extremely hot! Pay attention to the markings on the

product.

25. Make sure that the air intake of the combustion engine is clear. Keep the air

intake free of dust, dirt particles, gases and fumes. Keep hands and feet away

from the cutting device at all times and especially when switching on the

engine.

«
...
6
7
8
9
10
...
»

Содержание 660EX





































Отзывы:

Нет отзывов