Baumr-AG 660EX Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 36

Baumr-AG 660EX Скачать руководство пользователя страница 6

SAFETY WARNINGS

1. This product is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the product by a person responsible for their safety.

2. Children should be supervised to ensure that they do not play with the

product.

Petrol powered lawnmowers safety warnings

IMPORTANT READ CAREFULLY BEFORE USE.

KEEP FOR FUTURE REFERENCE.

1. Training

1. Read the instructions carefully. Be familiar with the controls and the proper

use of the product.

2. Never allow children or people unfamiliar with these instructions to use the

product. Local regulations can restrict the age of the operator.

3. Never mow while people, especially children, or pets are nearby.
4. Keep in mind that the operator or user is responsible for accidents or hazards

occurring to other people or their property.

2. Preparation

1. While mowing, always wear substantial footwear and long trousers. Do not

operate the product when barefoot or wearing open sandals.

2. Thoroughly inspect the area where the product is to be used and remove all

objects which can be thrown by the product.

3. WARNING - Petrol is highly flammable.

  Store fuel in containers specifically designed for this purpose.
  Refuel outdoors only and do not smoke while refuelling.
  Add fuel before starting the engine. Never remove the cap of the fuel tank

or add petrol while the engine is running or when the engine is hot.

«
...
4
5
6
7
8
...
»

Содержание 660EX





































Отзывы:

Нет отзывов