Baumr-AG 660EX Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 36

Baumr-AG 660EX Скачать руководство пользователя страница 13

Do not smoke in the work area, around the product and in the

vicinity of flammable materials!
Risk of fire / flammable materials

Hot surface, do not touch. High temperatures on the product’s

surfaces and structural parts that could cause burns, if they are

touched. The product can also stay hot for a longer period of

time after operation!
This product produces noxious exhaust fumes. If the product is

used improperly, these fumes can lead to poisoning, a loss of

consciousness or death!
Only refuel unleaded petrol!

Add engine oil
Check and refill oil.

Switch the engine off while you are refilling the tanks!

Switch the product off and disconnect the spark plug connector

before assembly, cleaning, adjustments, maintenance, storage

and transportation.

Mow across the face of slopes, never up and down.

Inspect the area where the product is to be used and remove

all objects which can be thrown by the product.
If objects are hidden while operating stop the engine and

remove the object.

«
...
11
12
13
14
15
...
»

Содержание 660EX





































Отзывы:

Нет отзывов