MB185T1 - 11072301
Baumer_OG60-OGS60-T1_II_DE-EN (19A2)
2
General notes
1
1
General notes
1.1
Symbol guide:
Danger
Warnings of possible danger
General information for attention
Informations to ensure correct device operation
i
Information
Recommendation for device handling
1.2
The
incremental encoder OG 60
and the
sine encoder OGS 60
are
opto electro nic preci-
sion measurement devices
which must be handled with care by skilled personnel only.
1.3
The expected
service life
of the device depends on the
ball bearings
, which are equipped with
a permanent lubrication.
1.4
The
storage temperature range
of the device is between -15 °C and +70 °C.
1.5
The
operating temperature range
of the device is between -30 °C and +85 °C,
restricted in potentially explosive environments, see section 2,
measured at the housing.
1.6
EU Declaration of Conformity
meeting to the European Directives.
1.7
The device is
UL approved
(not applicable for operation in potentially explosive atmospheres).
1.8
We grant a
2-year warranty
in accordance with the regulations of the ZVEI (Central Association
of the German Electrical Industry).
1.9
Maintenance work
is not necessary.
Repair work
that requires opening the device must be car-
ried out by the
manufacturer
. Alterations of the device are not permitted.
1.10
In the event of
queries
or
subsequent deliveries
, the data on the device type label must be
quoted, especially the type designation and the serial number.
1.11
Disposal (environmental protection):
Do not dispose of electrical and electronic equipment in household waste. The product
contains valuable raw materials for recycling. Whenever possible, waste electrical and
electronic equipment should be disposed locally at the authorized collection point. If
necessary, Baumer gives customers the opportunity to dispose of Baumer products profession-
ally. For further information see www.baumer.com.
i
Warning!
Damaging the seal
on the device invalidates warranty.
