Baumer Ident OIS-P PC 3100 series, Руководство по установке

Страница: 28 / 46

28 Baumer Ident OIS-P, PC3141/03 Manual
6.2 Electrical connection
6.2.1 Power supply and object detect
The unit should be connected to power supply 24
VDC.
An active OD-signal should be represented by a
24VDC voltage on the OD input. There are totally 6
digital inputs and 6 digital outputs available.
The connection is done to POWER and I/O, see
Figure 6.2, 6.3 and 6.4. POWER is a male 9 pin D-
Sub 9 connector. Use cable connector D-Sub 9
female.
Figure 6.2 Power and I/O connection
Installation
POWER
PC3141/03
1
2
3
4
OV
5
6
+24VDC
7
8
9
}
I/O
PC3141/03
OUT5
OUT3
OUT1 (BSY)
+24VDC
IN5
IN3
IN1 (RALA)
OV
OUT4
OUT2 (LOCK)
OUT0 (ALA)
+24VDC
IN4
IN2 (LOCK)
IN0 (OD)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
For RS485 and current loop connection also see
figure 6.6, 6.7, 6.8.
HOST
PC3141/03
CLI-
RxD RS232
TxD RS232
CLO-B
RxD –RS485
GND
TxD +RS485
CLI+
RTS
CTS
CLO-A
RxD +RS485
TxD –RS485
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Figure 6.3 Interface circuit, input
Figure 6.4 Interface circuit, output
6.2.2 Serial communication (HOST)
The serial interface is RS232, RS485 or passive
current loop. The connection is done to HOST, see
Figure 6.5. HOST is male 15 pin D-Sub connector.
Use cable connector D-Sub 15 female.
Figure 6.5 Serial connection