background image

 

18

entilation requirements 

e cooker should have an air supply in 

accordance with the current edition of BS 5440: Part 2:  

 

o

 

rooms may also require a permanent vent.  

o

 

³, it will require an 

air vent of 50cm² (effective area). Unless it has a door which 

o

 

s than 5m³, it will require an air 

vent of 100cm² (effective area). 

 

o

 

olume that exceeds 11m³, then 

no air vent is required. 

 

o

 

el burning appliances in the same room 

the current edition of BS 5440: Part 2: should be consulted to 

 

o

 

e cooker is well ventilated, 

keep natural ventilation holes or install a mechanical ventilation 

 

o

 

ance may call for additional 

ventilation, either by the opening of a window, or by increasing 

 

o

 

of combustion. Ensure that the ventilation rules and regulations 

 

o

 

d and near the hob should be resistant to heat, 

steam and condensation.  

 

o

 

y of air necessary for combustion 

must never be less than 2m³/h for each kW of power (see total 

 

 

V
 

o

 

The room containing th

The room must have opening windows or equivalent; som

 

If the room has a volume between 5 and 10m

opens directly to the outside.  

 

If the room has a volume of les

If it is installed in a room with a v

If there are any other fu

determine air vent requirements.  

Ensure that the room containing th

device (mechanical cooker hood).  

Prolonged intensive use of the appli

the level of the mechanical ventilation device (where present).  

This hob is not fitted with a device for discharging the products 

are followed.  

The walls behin

Remember that the quantit

power in kW on the appliance rating plate). 

 
 
 
 
 
 
 

Содержание Pythagora P61SS





























Отзывы: