4)
Using a pencil, mark the
centre of the wall where the
cooker hood will be installed.
Place the mounting bar against
the wall and ensure that the
middle of it is placed on the
centre mark.
o
Use a pencil to mark the
position of where the
screw holes will be drilled.
o
Use a spirit level to ensure
that the two markings are
horizontally level.
5)
Using a drill bit with an 8 mm
diameter, make holes in the wall on the
positions that you marked in step 4.
6)
Insert rawl plugs into the two holes that you have
just drilled.
o
Screw the mounting bar to the wall using 2 x 8
mm screws.
o
IMPORTANT: You must make sure that the
mounting bar is the right way up and the
right way around. Please see picture 4 if you
are unclear of the correct position for the
mounting bar.
o
Fully tighten these screws to fix the mounting bar to the wall.
20
Содержание Pythagora P25SS
Страница 1: ...P25SS 90 cm Cooker Hood ...
Страница 30: ...30 ...
Страница 31: ...31 ...
Страница 32: ...32 32 ...
