27
It is possible to purchase a specialist ceramic cooktop
cleaner/conditioner.
You should follow the instructions given by the manufacturer of the
specialist ceramic cooktop cleaner. You should ensure that it is suitable
for use on your appliance.
Installation
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
AS/NZS 3000: 2007 Wiring Regulations
o
2010 Electricity Safety Regulations
Positioning
The adjacent furniture must be able to withstand a
minimum temperature rise of 85°C above the ambient
temperature of the room it is located in, during
periods of use.
This appliance is to be built into a kitchen unit (depending on size) or
600 mm worktop that is at least 30 mm thick. The following minimum
clearance distances must be observed:-
o
700 mm between the cooktop surface and the underside of any
horizontal surface above it.
o
65 mm clearance around the front and sides of the appliance,
and 100 mm clearance at the back of the appliance, measured
from the cut out, providing the material next to the cooktop is
made of a non-combustible material.
o
If the cooktop is positioned so that the right or left hand side of
the appliance will be near to the edge of a kitchen unit. There
must be a gap of at least 100 mm between the side of the
cooktop and the vertical surface of the kitchen unit.
Unpacking the appliance
When unpacking the appliance please check that the following items
are contained within the packaging:-
1 Cooktop
1 Installation and instruction manual
1 Guarantee card
4 Fixing brackets
4 Fixing screws
