Baumatic BWD1206SL-W, Руководство пользователя

Страница: 31 / 36

31
Error code failure system
If your appliance senses that it is not operating correctly, then an error
code may appear on the LED display.
The following error codes can possibly be remedied by the customer
and the steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR
POWER SUPPLY.
Error
code
Possible causes Solutions
Err 1
o
Washer door is not properly
shut.
o
Shut the door properly.
Err 2
o
Drainage error. Water is not
emptied within 4 minutes.
o
Clean the filter and check the
drain hose for blockage.
Remove the filter in case any
water remains in the unit.
Err 3
o
Temperature sensor error.
o
Please contact the customer
care helpline.
Err 4
o
Heater error or laundry
overload. The set
temperature is not reached
within specified time
(appears at the end of a
cycle).
o
Reduce load and start washing
again.
o
Please contact the customer
care helpline.
Err 5
o
Water level not met within 8
minutes.
o
Check the tap and the water
pressure.
Err 6
o
Dehumidification / heating
error.
o
Please contact the customer
care helpline.
Err 7
o
Motor overheat error.
o
Please contact the customer
care helpline.
Err 8
o
Water overflow.
o
Please contact the customer
care helpline.
Err 9
o
Error of the dryer
temperature sensor.
o
Please contact the customer
care helpline.
Er 10
o
Error of the water level
sensor.
o
Please contact the customer
care helpline.
Er 12
o
Error of the dryer water level
sensor.
o
Check whether clothes are dry
or not and whether there is
water still in the drum. If so,
allow excess humidity to
escape from the appliance and
try the drying cycle again.
Er 13
o
Dryer heater error.
o
Please contact the customer
care helpline.
Unb
o
Laundry is unevenly
distributed.
o
Redistribute laundry to balance
the drum.
EUAr
o
Communication error.
o
Please contact the customer
care helpline.
1:16
o
Status information: remaining program time is 1 hour and 16
minutes.
0:01
o
Status information: remaining program time is 1 minute.
60 °C
o
Status information: wash temperature is 60 °C.