Baumatic BWD1206SL-W, Руководство пользователя

Страница: 28 / 36

Connecting to the mains water supply
IMPORTANT: The washing machine should never be connected to the
water mains using an existing inlet hose, YOU MUST utilise the inlet
hose that is provided with the appliance.
Your appliance should only be connected to a cold water supply.
1) Connect and fully tighten the inlet
hose to the threaded inlet valve that
is located at the rear of the washer
dryer. You should connect the end
with the right angle connector on it
to the back of your appliance.
2) Connect the other end of the inlet hose to
your mains water supply.
IMPORTANT: There should be a filter sitting inside the end of
the inlet hose that connects to your mains water supply. The
inlet hose may leak if this filter is missing. This filter is supplied
with the appliance, you should contact Baumatic to obtain one,
if it is missing.
o
Tighten the inlet hose to your mains supply fully, but do not over
tighten as this may distort the filter that sits in the end of the
inlet hose.
o
Test for any leaks.
Connecting to the water outlet
1) Use the drain hose bracket to keep the end
of the drain hose retained and prevent the
outflow of water. Don’t extend the length of the
drain hose.
28