5) Fix the upper chimney section to the hanging
plate, using the 4 x self tapping screws.
o
Slide the lower chimney section onto the
angle bars and raise it until it sits just below
the upper chimney section.
o
Use the hanging hook to temporarily keep
the lower chimney section in this position, to
make sure that it does not drop down whilst
fixing the main body of the hood to the
angle bars.
6) If you are going to be using the
hood in extraction mode, you should fit
the spigot for the duct hose onto the
main body of the cooker hood, using
the 4 x M4 bolts,
7) Lift the main body of the cooker hood onto the angle bar and
then fix it into position using the 16 x M4 bolts.
o
IMPORTANT: This stage of the installation process MUST
be completed by two people.
o
IMPORTANT: The 16 x M4 bolts MUST be securely
tightened.
21
Содержание BTI975GL-SA
Страница 1: ...1 BTI975GL SA 90 cm Glass island cooker hood ...
Страница 27: ...27 ...
Страница 28: ...28 ...