Baumatic BTI975GL-SA, Инструкция по эксплуатации

Страница: 22 / 28

8) If you are going to be using the
hood in extraction mode, you should
fix the ducting hose to the spigot.
o
The electrical connection must
correspond to the electrical
requirement noted on the
rating plate, which is placed
inside the cooker hood. The
appliance should now be
connected to the electrical
supply. See page 15 - 16 for
detailed information on the
electrical connection.
o
Check that the appliance is operating correctly by selecting each
speed and switching the light bulbs on and off.
o
Remove the hanging hook
and then slide the lower
chimney section
downwards, until it rests
against the main body of
the cooker hood.
Completing the installation
o
If you are setting the appliance to recirculation mode, then you
should now fit the carbon filter. See the “Fitting the carbon filter”
section on page 13 - 14.
o
The electrical connection must correspond to the electrical
requirement noted on the rating plate, which is placed inside the
cooker hood. The appliance should now be connected to the
electrical supply. See page 15 - 16 for detailed information on
the electrical connection.
o
Use a stainless steel cleaner and polish on the stainless steel
sections of the appliance.
22