Baumatic BC192.2TCSS, Руководство пользователя

Страница: 31 / 44

31
Gas Safety (Installation and Use) Regulations
o
It is the law that all gas appliances are installed by competent
persons in accordance with the current edition of the Gas Safety
Installation and Use Regulations.
o
It is in your interest and that of safety to ensure compliance with
the law.
o
In the UK, GASSAFE registered installers work to safe standards
of practice. The cooker must also be installed in accordance with
the current edition of BS 6172. Failure to install the cooker
correctly could invalidate the warranty, liability claims and lead
to prosecution.
o
IMPORTANT: It is a requirement for the safety bracket
supplied with the appliance, to be fitted. Please refer to
the separate sheet provided with the cooker that gives
detailed information on how to fit the safety bracket.
Gas connection
ALL INSTALLATION AND SERVICE WORK MUST BE
CARRIED
OUT BY A GASSAFE REGISTERED
ENGINEER.
o
Prior to installation, ensure that the gas supply conditions
(nature of the gas and gas pressure) and the adjustment
conditions are compatible. The adjustment conditions for this
appliance are stated on the rating plate which can be found on
the back cover.
o
This appliance is not designed to be connected to a combustion
product evacuation device. Particular attention should be given
to the relevant requirements regarding ventilation.
o
Connection to the cooker should be made with an approved
appliance flexible connection to BS 669.
o
A fixed elbow is already connected to the gas rail.
o
A 15 mm end feed (male) must be connected to the fixed elbow.
A fibre washer must be placed in the end of the feed that
connects to the fixed elbow.
o
A straight female to female equal black connector must then be
attached. The approved flexible connection should be made to
this.