Baumatic BAEC2SS.2, Руководство пользователя

Страница: 14 / 29

¾
Noise generated during this operation is perfectly
normal. This is caused by the activation of the high
pressure pump during this operation.
¾
It is also quite normal for a certain amount of water
to drip into the drip tray after water has been
dispensed.
2) Dispensing steam through the steam boiler
o
Follow the instructions on filling the water reservoir (pages 12 –
13) as stated previously and proceed as follows:-
o
Press the steam boiler activation button (31) to allow the boilers
to heat up. During this process, the steam boiler status indicator
(25) will flash.
o
Whilst the steam boiler is heating up, it is normal to get a small
amount of water dripping from the pipe for boiling water and
steam. (17).
o
When the boilers have reached their operating temperature, the
steam boiler status indicator (25) will stop flashing and remain
steady.
o
To dispense steam, press the steam boiler dispensing button
(32).
NOTE: Steam will dispense from the pipe for boiling water and
steam (17).
o
To stop steam from dispensing, press the same button again.
¾
The noise generated during this operation is perfectly
normal. This is caused by the activation of the high
pressure pump during this operation.
¾
It is also quiet normal for a certain amount of water to
drip into the drip tray after water has been dispensed.
14
ll
get hot.
There is a danger of
scalding.
sing pipe
o
WARNING: During this operation,
extreme caution should be
exercised, as the dispensing pipe wi
o
When releasing steam, avoid
directing the steam towards your
person.
o
Always use a container or a mug
underneath the dispen