Baumatic BAEC2SS.2, Руководство пользователя

Страница: 12 / 29

o
Install the appliance as per the installation instructions contained
within this booklet.
o
Open the water reservoir door (14) and remove the water
reservoir (15) from the cabinet.
o
Remove the water softener filter (11) from its connecting pipe
and immerse it in a bowl of cold water for approximately five
minutes prior to reconnecting.
o
Fill the water reservoir with cold water until it is two thirds full.
o
Re-connect the water softener filter (11) to the longest tube and
then place it inside the water reservoir, along with the other two
tubes.
o
Put the water reservoir back into the cabinet.
o
IMPORTANT: Make sure that the water reservoir is
positioned correctly on the pedal inside the water
reservoir cabinet (as shown in the picture on the
previous page).
o
Switch the appliance on using the power ON/OFF switch (20);
the power ON indicator (22) will light.
o
If the water level in the water reservoir is not sufficient the low
water level indicator (28) will start flashing. You should add
more water to the water reservoir.
o
IMPORTANT: If the low water level indicator (28)
remains steady even after filling the water reservoir
with additional water, you should switch the machine
off using the power ON/OFF switch (20) and then
restart after few seconds.
2a) What to do if the water level runs low during operation
o
If whilst making drinks, the water reservoir runs low
on water, the low water level indicator (28) will
flash. The espresso machine will stop any drinks
making operation that is in progress.
o
You should turn the appliance off using the power ON/OFF switch
(20).
o
Then follow the process described above on filling the water
reservoir manually.
12