1 INTRODUCTION
Congratulations on your choice of a Baumalight
Skid Steer Stump Grinder to complement your
stump grinding operation. This equipment has been
designed and manufactured to meet the needs
of a discriminating buyer for efficient grinding of
stumps.
The S24 and S28 have 34 teeth on a 24 inch cutter.
This means less cutting for each tooth resulting in
longer tooth life and smoother cutting for less wear
on the skid steer. Heavy tooth population makes
finer mulch and smoother operation.
The cutting wheel is powered by the hydraulics on
your skid steer with the swing cylinders activated
by the standard remote hydraulic connectors on
the skid steer.
Grease zerks and replaceable bushings are
provided at major pivot points for extended service
life.
The debris shields is standard equipment on all
stump grinders. It is recommended that the stump
grinder never be operated without one.
Safe, efficient and trouble free operation of your
Stump Grinder requires that you and anyone else
who will be operating or maintaining the Stump
Grinder, read and understand the Safety, Operation,
Maintenance and Troubleshooting information
contained within the Operator’s Manual.
This manual covers the Baumalight Skid Steer
Stump Grinder, models S24 and S28. Use the
Table of Contents as a guide to locate required
information.
Keep this manual handy for frequent reference
and to pass on to new operators or owners. Call
your Baumalight dealer, distributor or the factory
if you need assistance, information or additional
copies of the manuals.
When this machine is worn out and no longer in
use, it should be returned to the retailer or other
party for recycling.
1.1 Overview
OPERATOR ORIENTATION - The directions left,
right, front and rear, as mentioned throughout this
manual, are as seen from the skid steer driver’s
seat and facing in the direction of travel.
1
Содержание STUMP BLASTER S24
