7 TROUBLESHOOTING
PROBLEM
CHECK
SOLUTION
Auger won’t turn.
No power
Place hydraulic system in detent.
Stones blocking auger.
Broken shear bolt(s).
Remove stones or raise auger to release.
Replace shear bolt(s). Identify cause of
failure and rectify before resuming work.
Auger stalls.
Not enough oil flow.
Running too slow.
Digging too fast.
Oil filter plugged.
Low oil level.
Increase oil flow. Be sure unit can supply
enough oil.
Increase engine RPM.
Lower loader at a slower rate.
Change oil filter.
Check oil level. Add as required.
22
