Cooktop with electric
hotplates
• If the worktop is made of
wood, fit the supplied clips.
1.
Position the 4 spring clips
(
B
) and fit them in their
locations on the underside
of the cooktop.
2.
Fit the cooktop into the
worktop.
•
If the worktop is made
of marble, plastic,
ceramics, natural stone,
etc.,
the cooktop must be
secured with brackets (
C
)
code 4819 310 18528 (to be
requested from After Sales
Service).
1.
Position the brackets over
the holes and secure them
with the supplied screws.
2.
Fit the cooktop into the
worktop.
Cooktop
• The cooktop must be set
into a worktop between
20 mm and 50 mm
thick.
There must be nothing
between the cooktop
and the oven (cross
rails, brackets, etc.).
• If the cooktop is to be
installed next to a
column unit, leave a
distance of at least
100mm from the edge
of the cooktop to the
side of the column unit.
• Cut an opening in the
worktop of the dimensions
shown in the Product
Description Sheet supplied
separately.
• If not already present, fit
the supplied seal to the
cooktop flange after
cleaning the contact area
as shown in the figure.
Installation
