LASER SPIRIT LEVEL
Leveling Functions
NOTE: The specified leveling accuracy applies for the alignment of
the laser beam with reference to the spirit levels 3 and 4.
If spirit level leaks, soak up with appropriate absorbent material and
dispose of safely. Spirit levels contain flammable liquid that may
cause respiratory tract, eye and skin irritation.
Position the Tool (see figure B)
For precise alignment with the spirit levels, the position of the tool is
important.
The specified leveling accuracy is only achieved when the tool is
correctly positioned:
For horizontal alignment with spirit level 4, the laser outlet opening
for line operation 5 must be horizontal and the aluminium supporting
surface 2 of the measuring tool must face downward.For vertical
alignment with spirit level 3, the laser outlet opening for line opera-
tion 5 must face upward and the aluminium supporting surface 2 of
the measuring tool must face sideward.
Alignment with Laser Line (Line Operation)
Fasten the measuring tool to wall holder 13, place it against a wall via
the three supporting points 7 or fasten it to an other magnetic surface
with the magnets 9.
Horizontal Alignment (see figures C-D):
The laser outlet opening for line operation 5 must be horizontal and
the alumnium supporting surface 2 of the measuring tool must face
downward.Horizontally align the measuring tool with spirit level 4. As
an example, you can align picture frames or shelves alongside the
horizontal laser line.
Note: Horizontal alignment with the laser line is only possible on the
surface, against which the measuring tool was placed. Even when
the measuring tool was aligned with the spirit level, the laser line on
a transverse wall does not necessarily run horizontal,and is thus not
suitable for leveling.
Vertical Alignment (see figure D) :
The laser outlet opening for line operation 5 must face upward and
the aluminium supporting urface 2 of the measuring tool must face
sideward. Vertically align the measuring tool with spirit level 3. As an
example, you can align top and base cabinets alongside the vertical
laser line.
Alignment off of reference points (see figure E) :
Turn the measuring tool to any required angle in order to align the
laser line alongside your reference points. As an example, this can be
used to hang picture frames parallel to stairs or to the incline of a
roof.
Projecting/Checking Heights via Laser point
(point operation) (see figure F)
