BAUKER CDI218W1, Оригинальное руководство пользователя

Страница: 14 / 20

EN-14
ACCESSORIES
Battery pack (ABP118W1) 2
Charger (ACG118W) 1
Belt clip 1
We recommend that you purchase your accessories listed in the above list from the same store that
sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you
and offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
= 74dB(A)
K
pA
= 3,0dB(A)
A weighted sound power L
wA
= 85dB(A)
K
wA
= 3,0dB(A)
Wear ear protection when sound pressure is over: 80dB (A)
Vibration Information
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete
Vibration emission value
ah,ID
=6,376 m/s²
Uncertainty K = 1,5 m/s²
Drilling into metal Vibration emission value
ah,D
= 2,689 m/s²
Uncertainty K =1,5 m/s²
The declared vibration total value may be used for comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING!
The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING!
To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the