9
1300 886 649
Model: AWMW1-315 Product Code: 49627 05/2015
www.tempo.org
AUS
Installation (Cont.)
IMPORTANT!
Attaching a flat panel TV to a wall mount requires specialist knowledge.
We assume no liability for any injury or material damage incurred due
to incorrect assembly or use. Make sure to follow all instructions in this
manual, and if you require professional advice, please consult a relevant
tradesperson.
Step 2: Mounting the rails to a television
• When the wall plate is properly attached to the wall, pull the swing arm as
far out from the wall as possible.
• Select the appropriate bolts (B-i/B-ii/C-i/C-ii/D-i) that fit the thread holes
at the back of your TV monitor.
NOTE: If the television manufacturer included different screws, use them,
not the ones that came with the bracket.
• You will need another person to help you attach the TV to the TV
mounting plate. While the other person is holding the TV monitor, insert
the four selected bolts through the spacers (D-ii) if required, and the
corresponding holes on the TV mounting plate into the thread holes on
the back of the TV, as illustrated
below (the illustration shows the TV
mounting plate without the attached swing arm and wall plate, for better
visibility). Then tighten the bolts.
• Make sure the TV mounting plate is mounted symmetrically and evenly.