8
1300 886 649
Model: AWMW1-315 Product Code: 49627 05/2015
www.tempo.org
AUS
Installation
Step 1: Attaching the wall plate
Tools required: Pencil, drill and drill bits, hammer, Phillips head screwdriver,
spanner wrench
Mounting to a brick or concrete wall
• Choose a solid wall area far away from any water source and direct
sunlight. Avoid hollow areas or the mortar joints between bricks.
• Using the wall plate of the wall bracket as a
template and with the aid of the spirit leveller
(F) mark the positions of the 5 holes on the wall.
Ensure the holes are level.
• Using an 8mm masonry bit, pre-drill a 5cm deep
hole in each marked location.
• Place the masonry plugs (E-ii) into the holes and
gently tap them with a hammer until flush with
the wall.
• Position the wall plate and insert the self-tapping
screws (E-i) into the plugs. Secure the wall plate
to the wall.
Mounting to a stud wall
• Locate the edges of studs in the wall using a commercially available stud
finder and mark the centre of the studs. Confirm the presence of the
studs by drilling a small diameter pilot hole.
• Using the wall plate of the wall bracket and supplied
spirit leveller, outline the location of the five holes on
the studs. Ensure the holes are level.
• Using a 3mm bit, pre-drill a 3cm deep hole in each
marked location.
• Position the wall plate and screw the self-tapping
screws (E-i) into the studs. Secure the wall plate to the
wall.