7
1300 886 649
Model: AWMW1-315 Product Code: 49627 05/2015
www.tempo.org
AUS
Getting Started
IMPORTANT!
• Only install this bracket on a structurally sound wall area that is strong
enough to hold the weight of the TV as well as the wall mount.
• Mount the bracket far away from any water source and direct sunlight.
• DO NOT attach the bracket to a hollow wall or decorative room divider.
• Consult your builder for advice if you want to install the bracket to a wood
stud wall. The wall must be strong enough for the weight of the bracket
and the TV.
• If you want to install the wall mount to a steel stud wall, purchase
suitable steel stud fasteners from your local hardware store. DO NOT
use the supplied large self-tapping screws in steel studs.
• This Swing Arm Wall Bracket consists of a wall plate with a swing arm
and a TV mounting plate at the end. It comes fully assembled. You first
affix the wall plate to the wall, then you will need help to attach your TV
to the TV mounting plate.
Before you start installing the wall bracket
• Unpack the product but keep all packaging materials until you have made
sure your new Swing Arm Wall Bracket is undamaged and in good working
order. (In case of damage, contact our after sales support line for advice
on examination, repair or return of the damaged product.) Plastic wrapping
can be a suffocation hazard for babies and young children, so ensure all
packaging materials are out of their reach.
• Read this manual to familiarise yourself with all the parts and installation
instructions. Pay particular attention to the safety instructions on page 5.
• All the parts that are supplied for installation are pictured on page 6 with
their respective part identification letter (A to F). Sort the items accordingly
so you know which ones to use during installation.
CAUTION!
At least two people are required
to install this Swing Arm Wall
Bracket. Do not attempt to
assemble it independently to
avoid incorrect assembly or any
possible injury this may cause.