Turning your TV on and off
To turn your TV on:
[CH
∧
/CH
∨
]
Connect the TV to an AC
power outlet and turn on the power switch
located below the front right hand side of
unit. The power indicator will initially be red
and then will change to blue. A few seconds
later an image will appear on the screen.
Turning off to standby mode
: Press [ ] on the
front panel or on the remote control to switch
to standby mode. You can activate the unit
again by pressing [ ].
Power indicator
:
Red
indicates standby mode.
Blue
shows that the unit is on.There will be
no light
when the power switch is in the off
position.
Notes:
Turn the power switch off when you do not
intend to use the TV for long periods, for
example overnight. Remove the connection
from the wall power outlet if you do not intend to
use the unit for longer periods, for example if
you plan to be away a few days. Wait at least 5
seconds after turning off if you want to re-start
the TV.
OK]
Selecting the video source
Selecting the video source depending on the
video device you have connected to your TV,
you can select DTV, ATV, AV, S-Video,
Component, VGA, and HDMI as the video
source.
To select the video source:
Press [
Source
] . When the list of video
sources appears, Press
to
select the source, then Press
[
to enter.
OK
EXIT
Input Source
DTV
ATV
AV1
AV2
S-Video
Component1
Component2
VGA
HDMI1
HDMI2
7
OK
EXIT
Channel List
11 DT65 480p
12 DT65 720p
13 DT65 480p
1 TV1
2 BBC1
3 S-01
4 S-02
5 C-42
6 S-04
7 C-02
DTV
DTV
DTV
TV
TV
TV
TV
TV
TV
TV
S-12
TV
PAL BG
Mono
10
Adjusting the volume
To adjust the volume:
Press
to increase or
decrease the volume.
Press
[Mute]
to turn the sound off. Press
[mute]
again to turn the sound back on.
Changing channels
To change channels:
Press
to go to the next
higher or lower channel.
Or, Press the number buttons to select a
channel. For example, to select channel
120, press 1, then 2, then 0.
Or, press
[Recall]
to go to the last viewed
channel.
Displaying channel lists
To display channel lists
1 Press
[OK]
to display the channel list.
2 Press
to select the channels.
3 Press
[OK]
to enter the channels.
4 Press
[Exit]
to exit the menu.
[VOL
∧
/VOL
∨
]
[CH
∧
/CH
∨
]
[CH
∧
/CH
∨
]
Getting Started
Getting Started
12
