PLUTONE ’09 v01
pag. 9
marzo 2009
16.
CLEANING OF THE BOILER PROBE
To clean the probe of the boiler, do as follows:
1.
open the rear panel of the machine;
2.
find the boiler and the probe;
3.
unscrew the probe by using a wrench and take it out;
4.
clean the probe with fine grain scrubbing paper in order to
eliminate all encrustation;
5.
re-assemble the probe and check that there are no leakages
when the boiler is under pressure.
17.
COMPULSORY PERIODICAL MAINTENANCE
(
TO BE CARRIED OUT EXCLUSIVELY BY AUTHORIZED SERVICE CENTRES, QUALIFIED
TECHNICIANS OR BY THE MANUFACTURER
.)
Compulsory maintenance is signalled by the icon
-
GENERAL MAINTENANCE
will be
displayed. Contact
only
your reseller, Authorized Service Centres or the manufacturer
in order to carry out the necessary maintenance. Once the check has been completed,
the authorized personnel will reset the “general maintenance” icon which is shown on
the display.
This machine was designed to work maximum 8 hrs. per day, 5 days a week. In these
conditions the machine is expected to function for 7 years.
FILTER
WATER
INLET
Fig. 4
PROBE
