PLUTONE ’09 v01
pag. 8
marzo 2009
Do not iron garments directly on
persons.
Do not leave hot iron on garments.
After use, always store away the
iron on proper iron rest.
14.
INTERVENTIONS AND SMALL REPAIRS
The following procedures MUST be carried out ONLY when the boiler is cold and the
plug is disconnected from the mains.
1.
replacement of the iron;
2.
replacement of the coil: to be done when boiler is turned off and is cold
(fig.1 :
solenoid valve)
;
3.
replacement of the steam hose: to be done when iron and boiler are turned off and
are cold
(fig. 2)
,
4.
cleaning of the water inlet filter
(fig. 4)
and cleaning of the foot valve filter
(PLUTONE with water tank –
fig. 1
).
15.
CLEANING OF WATER FILTER
The cleaning of the filter is to be done whenever the warning is displayed. If the water is full
of impurities, cleaning should be done more often.
To clean the water filter:
1.
turn off the main water supply tap;
2.
unscrew the filter plug by using a wrench as shown in fig. 4;
3.
take out the filter;
4.
by using running water, clean the filter in order to eliminate all impurities;
5.
re-assemble the filter, fix with the wrench and turn on the main water supply tap,
checking at the same time if there are any leakages.
WARNING:THERMIC
DANGER
INCANDESCENT IRON
BASE
