Battipav Expert 500, Руководство по эксплуатации

Страница: 23 / 37

35
Battipav srl Battipav srl GB
TROUBLESHOOTING
THE EXPERT SAW MUST BE REPAIRED BY QUALIfIED PERSONNEL.
This machine complies with the relevant safety standards. Repairs must only be carried out by qualified
personnel using original spare parts, or else the operator could be put at serious risk.
Problem Cause Remedy
The machine is not working. The power supply cable is
connected incorrectly or damaged. Push it all the way into the plug.
Check the power supply cable.
There is no power in the electrical
socket. Have the electrical socket tested.
The amperometric excess current
circuit breaker has tripped. Push the reset button.
The high temperature trip switch is
damaged. Contact your retailer for a
replacement.
The control switch is damaged. Contact your retailer for a
replacement.
The lubricant is not reaching the
cutting tool.
The sprayer is blocked. Remove the sprayer from inside
the disc guard and clean off any
residue.
The water circulation pump is
damaged. Contact your retailer for a
replacement.
The lubricant pipe is flattened. Remove anything obstructing the
lubricant pipe.
The motor is emitting a bad smell. Water has got into the motor. Contact your retailer for a
replacement.
The motor is damaged. Contact your retailer for a
replacement.
The motor is not starting properly. The motor bearings are damaged. Contact your retailer for a
replacement.
The motor is damaged. Contact your retailer for a
replacement.
The laser marker is not working. The laser module is damaged. Contact your retailer for a
replacement.
The marker feeder is damaged. Contact your retailer for a
replacement.