Questions? Visit BathRoyale.com or call (704) 589-1009
Installation Instructions
7
10. Place mounting base covers on mounting
bases.
Tip:
If you prefer stainless steel covers, brushed
nickel and polished chrome finishes are sold
separately at BathRoyale.com.
11. Replace seat.
Align holes with mounting posts and carefully
lower seat back into place. You will hear ‘clicks’ as
the seat locks onto posts.
NOTE:
Do not push hard or force seat onto posts.
(If difficult, re-check alignment of posts and holes).
Tip:
Practice removing seat (Step 9) and replacing
seat (Step 11).
CARE & CLEANING TIP: DO NOT
spray or saturate the mounting bases. (Doing so may
cause seat to move out of position). Spray your cloth first, then wipe.
Troubleshooting Tips:
a. Rear bumpers are not supposed to touch the bowl until person is seated.
b. If seat or lid do not stay open, adjust the seat forward (see Step 6). Increasing the length also
increases layback angle. Make sure tank lid is pushed back as far as possible.
c. See more tips and installation video at BathRoyale.com.
11.
10.
