Questions? Visit BathRoyale.com or call (704) 589-1009
Installation Instructions
5
5. Close seat and cover.
Tap forward and let the seat and lid close by
themselves.
Tip:
It is OK to push the seat and lid closed. Unlike
other Slow-Close seats, Bath Royale® seats can
be force-closed repeatedly, without damaging
the Slow-Close mechanism.
Closing too slow? Push it closed.
6. Adjust seat.
If mounting bases are tilting forward, push them
down so they sit flat on bowl. With the lid closed,
align seat with bowl by moving the seat and
mounting bases together.
Tip:
Lift back of seat to unstick mounting bases
from bowl (loosen screws if necessary). We
recommend installing the seat overhanging
the front of the bowl by ¼ inch, so the seat
can be lifted more easily without touching the
toilet bowl.
Tip:
In most cases, screw heads will be towards
back of screw slot (see drawing). Don’t worry
if screw positions don’t match on both sides.
Hole positions can vary slightly on all toilets.
5.
6.
4.
4. Attach seat (Quick-Release mechanism).
Carefully lower seat (holes) onto mounting posts.
NOTE: If posts are not perfectly aligned, move seat
or mounting base(s) so both posts can be inserted
at the same time (lift mounting bases to unstick from
the bowl, if necessary). As the seat lowers onto the
posts, you will hear “click(s)” as the seat locks onto
the posts.
Tip:
If one post locks before the other post is
inserted, don’t worry or try to unlock it, move
the seat and/or mounting bases so the other
post can be inserted.
NOTE:
Quick Release is “unlocked” by pressing
the buttons (see diagram 4). If a button is pressed
before attaching the seat, don’t worry, it will pop
“out” (lock) when the seat is attached.
