Questions? Visit BathRoyale.com or call (704) 589-1009
Installation Instructions
6
7. Hand-tighten wing nuts.
Put finger or thumb on screw head and push down
to prevent screw from turning.
Tip:
Be sure the seat does not move.
8. Double check seat alignment and tighten
screws very firmly.
Important:
To tighten properly, it is necessary
to hold wing nuts beneath while tightening with
screwdriver.
Tip:
If screw heads are obstructed by the seat,
remove seat for final tightening (see next
step).
9. Remove seat using Quick Release.
a. With seat and cover open, press 1 button, then
the other. (Pressing the buttons ‘unlocks’ the
seat).
b. Lift straight up with one or both hands. (You will
hear ‘clicks’ as the seat slips off the posts very
easily).
Tip:
1. If difficult, re-check post alignment.
2. Mounting surface must be level, so
mounting bases lay flat and mounting posts
point straight up.
8.
7.
9a.
9b.
