Batca Fitness Systems
30
Fusion 4 Lower Body Station
Final Assembly and Troubleshooting
Pulley Cover
BFM-50345
IMPORTANT - Check These Components Before Using Gym:
Position the cable guard tab on the Pulley Cover so
that the tab prevents the cable from coming out of it’s
track on the 3 1/2” Pulley. An example of this
positioning can be seen in the figure to the right. The
cable guard tab should be positioned so that it is in
the middle of the cable wrap on the 3 1/2” Pulley,
between points “A” and “B”. This will allow better
protection and prevent the cable from rubbing the
cable guard tab. Refer to Step19.
Each Cable with a threaded bolt on either end must be threaded at least 1/2”
into its attachment, whether it be a Free Floater, Lockout Free Floater, or
the Top Plate of the weight stack. Each must also be secured with a 1/2” Jam
Nut to ensure a safe and proper connection. Refer to Steps 6, and 7. See
Figures below
.
Top Plate
1/2” Jam Nut
Free Floater w/ Lockout
Large Flat
Leveler
