www.batcafitness.com
27
Fusion 4 Lower Body Station
Cable Adjustments
1
3
Note: All cables with threaded adjustable
ends must have at least 1/2” of the threads
threaded into its counterpart. It is very
important that the 1/2” Jam Nut be wrench
tightened to the counterpart to ensure
that the threaded adjustable end of the
cable
does
not
back
out
of
its
counterpart.
Adjust cables to proper tension from
any of the locations shown below.
How to Begin: In order to get the proper
tension in your cables, it is recommended
that you follow the sequence 1-5 as
shown on pages 29 and 30. The numbers
for this sequence can be found in the
upper left corner of each of the detailed
views. Each detailed view below will
refer you to the original Figure for more
detailed
information.
Follow
the
detailed information found in each
referenced figure.
Note: If the top plate raises off of the
second plate in the weight stack, then the
cable tension is too tight. You will need
to take some of the tension out to lower
the Top plate flush with the second
plate.
Refer to
Figure 6
2
Refer to
Figure 7
Refer to
Figure 9
