English
18
You can order spare parts from the After
Sales Support line by providing the follow-
ing information:
• type/model of product;
• item number of product.
9. Storage
1.
Switch the product off and disconnect
it from the mains supply.
2.
Clean the product as described above.
3.
Store the product and its accessories in
a dark, dry, frost-free and well-ventilated
place.
4.
Always store the product in a place that
is not accessible to children. The ideal
storage temperature is between 10 °C
and 30 °C.
5.
We recommend that you store the prod-
uct in its original packaging or cover it
with a suitable cloth to protect it against
dust
6.
Store the product and the accessories
in the transport case
(24)
.
10. Transport
1.
Switch the product off and disconnect
it from the mains supply.
2.
Attach any transport protection devices,
if any.
3.
Always carry the product by the
handles.
4.
Protect the product against impact and
intense vibrations, which occur particu-
larly when transporting in vehicles.
5.
Secure the product against shifting and
tilting.
11. Faults and repair
WARNING!
Only carry out work that is
described in this user manual! Any
other inspection, maintenance or repair
work must be carried out by authorised
After Sales Support or a similarly qualified
professional!
Alleged malfunctions, faults or damage are
often caused by situations that could have
been rectified by the user themselves.
Therefore, check the product before con-
tacting a professional by using the table
below. In most cases, faults can be reme-
died quickly.
Problem
Possible cause
Solution
1.
The product
will not start.
The mains plug has not been
inserted in a socket.
Connect the mains plug with a prop-
erly installed socket.
The carbon brushes are
worn.
Have a qualified person replace the
carbon brushes.
The mains cord is broken.
Pull the mains cord out of the socket.
Have a qualified person replace it.
Other electrical defect on the
product.
Have it checked by a professional.
2.
The product
does not reach
its full power.
Extension cable too long
and/or its cross section is
too low.
Use a suitable extension cable.
The voltage of the mains
supply (e.g. generator) is too
low.
Connect the product to a suitable
mains supply.
Vents are blocked.
Clean the vents.
7063051-Thor-Compact-Ma-1804-30.indb 18
04-06-18 11:55
