English
10
• Round the top edges of the hedge.
• Finally trim the bottom edges back.
• Appropriately dispose of cut materials.
15. Maintenance and cleaning
• When servicing, use only identical
replacement parts. Use of any other
parts may create a hazard or cause
product damage. To ensure safety and
reliability, all repairs should be per-
formed by a qualified service
technician.
• When the hedge trimmer is stopped for
servicing, inspection or storage, shut
off the power source, disconnect the
plug from the power supply and make
sure all moving parts have come to a
stop. Allow the hedge trimmer to cool
before making any inspections, adjust-
ments, etc.
• When transporting or storing the hedge
trimmer, always fit the blade bar protec-
tion
(7)
.
• Never use water for cleaning the trim-
mer. Avoid using solvents when clean-
ing plastic parts. Most plastics are
susceptible to dam-age from various
types of commercial solvents. Use
clean cloths to remove dirt, dust, oil,
grease, etc. Remove dirt from the blade
bar with a scrubbing brush or a small
brush. Clean the ventilation slots with a
soft brush.
• Wear safety gloves when handling the
blade bar to avoid risk of injury! Oil the
blade bar with machine oil after clean-
ing and before using the hedge trimmer
again.
• Store the hedge trimmer in a dry, dust-
free and frost-protected place out of
reach of children.
• When the power cord is damaged, dis-
connect the plug from the mains sup-
ply. Not use the hedge trimmer any-
more. If the supply cord is damaged, it
must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
16. Technical data
Rated voltage: . . . . . . . . . 230 V~ 50 Hz
Rated power: . . . . . . . . . . . . . . . 710 W
No load speed: . . . . . . . . . . . 1700 min
-1
Cutting length: . . . . . . . . . . . . .510 mm
Cutting capacity:. . . . . . . . . . . . 24 mm
Blade length: . . . . . . . . . . . . . 585 mm
Hedge trimmer weight approx.: . . . . . 4 kg
Hedge trimmer weight
with telescopic handle: . . . . . . . . . . 5 kg
Dimensions of the
hedge trimmer: . . . . . . 205 × 18 × 22 cm
Max. angle inclination
Horizontal: . . . . . . . . . . . .-90° … +90°
Vertical:. . . . . . . . . . . . . .-80° … +60°
Length of power cord:. . . . . . . . . . 35 cm
Protection class: . . . . . . . . . . . . . . . . II
Sound pressure level L
pA
: . . . . . 92.3 dB(A)
Uncertainty K
pA
: . . . . . . . . . . . 2.5 dB(A)
Sound power level L
WA
: . . . . . 98.04 dB(A)
Uncertainty K
WA
: . . . . . . . . . . 3.21 dB(A)
Guaranteed
Sound Power Level L
WA
:. . . . . . .101 dB(A)
Hand/arm vibration:. . . . . . . . 2.579 m/s
2
Uncertainty K: . . . . . . . . . . . . .1.5 m/s
2
16.1
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
7062983-Hedgetrimmer-Ma-1712-05.indb 10
08-02-18 16:48
