English
6
operation. If damaged, have the power
tool repaired before use.
Many acci-
dents are caused by poorly maintained
power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner
intended for the particular type of
power tool, taking into account the
working conditions and the work to be
performed.
Use of the power tool for
operations different from intended
could result in a hazardous situation.
2.5
Service
a. Please use a qualified expert who uses
original replacement parts to repair
your power tool.
This will ensure proper
functioning of the power tool.
3. Safety warnings common for
grinding or abrasive cutting-off
operations
a. This power tool is intended to function
as a grinder tool. Read all safety warn-
ings, instructions, illustrations and
specifications provided with this
power tool.
Failure to follow all instruc-
tions listed below may result in electric
shock, fire and/or serious injury.
b. Operations such as sanding, wire
brushing, polishing are not recom-
mended to be performed with this
power tool.
Operations for which the
power tool was not designed may cre-
ate a hazard and cause personal injury.
c. Do not use accessories which are not
specifically designed and recom-
mended by the tool manufacturer.
Just
because the accessory can be attached
to your power tool, it does not assure
safe operation.
d. The rated speed of the accessory
must be at least equal to the maxi-
mum speed marked on the power tool.
Accessories running faster than their
rated speed can break and fly apart.
e. The outside diameter and the thick-
ness of your accessory must be within
the capacity rating of your power tool.
Incorrectly sized accessories cannot be
adequately guarded or controlled.
f. Threaded mounting of accessories
must match the grinder spindle
thread. For accessories mounted by
flanges, the arbour hole of the acces-
sory must fit the locating diameter of
the flange.
Accessories that do not
match the mounting hardware of the
power tool will run out of balance,
vibrate excessively and may cause loss
of control.
g. Do not use a damaged accessory.
Before each use inspect the accessory
such as abrasive wheels for chips and
cracks, backing pad for cracks, tear or
excess wear, wire brush for loose or
cracked wires. If power tool or acces-
sory is dropped, inspect for damage or
install an undamaged accessory. After
inspecting and installing an acces-
sory, position yourself and bystanders
away from the plane of the rotating
accessory and run the power tool at
maximum no-load speed for one min-
ute.
Damaged accessories will normally
break apart during this test time.
h. Wear personal protective equipment.
Depending on application, use face
shield, safety goggles or safety
glasses. As appropriate, wear dust
mask, hearing protectors, gloves and
workshop apron capable of stopping
small abrasive or workpiece frag-
ments.
The eye protection must be
capable of stopping flying debris gener-
ated by various operations. The dust
mask or respirator must be capable of
filtrating particles generated by your
operation. Prolonged exposure to high
intensity noise may cause hearing loss.
i. Keep bystanders a safe distance away
from work area. Anyone entering the
work area must wear personal protec-
tive equipment.
Fragments of work-
piece or of a broken accessory may fly
away and cause injury beyond immedi-
ate area of operation.
7062851-Angle-Grinder-2200W-Ma-1801-15.indb 6
26-03-18 10:55
