Batavia 7050560, Перевод оригинальной инструкции

Страница: 30 / 64

30
TM
7. ClEAnIng And mAInTEnAnCE
Warning! Pull out the power plug
before any cleaning work.
Cleaning
• Keep safety devices, ventilation openings and the
motor housing as free as possible from dirt and
dust. Rub the electric power tool with a clean cloth
or blow over it with low pressure compressed air.
• We recommend that you clean your electric power
tool immediately after each use.
• Clean the electric power tool regularly with a
damp cloth and somewhat soft soap. Do not use
any cleaning or solvent materials; these can
attack the device's plastic components. Make sure
that no water can get inside the electric power
tool.
Carbon brushes
In the event of excessive sparking, allow a
qualified person to examine the carbon brushes.
Attention! The carbon brushes may only be
exchanged by a qualified person.
maintenance
There are no further parts requiring maintenance
inside the electric power tool.
8. rEPAIr And ordErIng oF SPArE PArTS
Exchanging the power cable
If the power cable of this electric power tool is
damaged, it must be replaced by the
manufacturer, its customer services department
or a similarly qualified person to avoid danger.
Spare parts/Accessories
Spare parts and accessories can be ordered
through our web shop: www.batavia.eu
Carbide tipped blade (2 pcs) Art. Nr. 7058019
Super cut blade (2 pcs) Art. Nr. 7058035
Diamond blade (2 pcs) Art. Nr. 7058001
Small Diamond Blade (2 pcs) Art. Nr. 7060098
9. dISPoSAl And rECyClIng
Do not dispose of electric power tools
with domestic refuse.
The electric power tool is shipped in packaging to
reduce transport damage. This packaging is a raw
material and as such can either be reused or can be
fed back into the raw material cycle. The electric
power tool and its accessories are made from various
materials such as metals and plastics. Take defective
components to a special refuse collection point. Ask
about these at your specialist shop or local council.
The product and the user manual may be subject
to changes. Technical data may be changed
without prior notice.
EC-declaration of conformity
We, the batavia gmbh, blankenstein 180,
nl-7943PE meppel, declare by our own responsibility
that the product mini hand Circular Saw, Item-no
7050560, model nr. bT-CS001 is according to the
basic requirements, which are defined in the European
Directives: 2006/42/EC (machinery), 2006/95/EC low
Voltage directive (lVd), Electromagnetic
Compatibility 2004/108/EC (EmC) and their
amendments. Attaching year of CE marking: 12. For
the evaluation of conformity, the following harmonized
standards were consulted:
En 60745-1: 2009+A11, En 60745-2-5: 2010,
En 55014-1: 2006+A1, En 55014-2: 1997+A1+A2,
En 60745-2-22: 2011, En 61000-3-2: 2006+A1+A2,
En 61000-3-3: 2008
Meppel, 01 september 2012
Storage of technical documents by:
Meino Seinen, Batavia GmbH, Blankenstein 180,
7943 PE Meppel, Netherlands