BASSRA MACHINE TOOLS LTD.
99 Spring Road, Tyseley, Birmingham, United Kingdom, B11 3DJ
Tel: 0044 (0) 121 707 4343 / Fax: 0044 (0) 121 707 3535
Website: www. bassra.com / Email: [email protected]
•
The owner is allowed to operate the machine only if it is in a safe condition.
Major repairs must only be carried out by the manufacturer or by specially
authorised, qualified personnel.
•
The operator must report and defects or alterations which affect the safety of
the machine.
•
Product safety signs or decals should be periodically inspected, cleaned or
replaced when they no longer meet the legibility requirements for safe viewing
at a reasonable distance.
•
Do not operate the machine outside the scope of its intended use. Application
outside the scope of intended use constitutes a safety hazard.
•
The manufacturer will not be liable for applications outside the scope of the
machines intended use. The owner shall in such cases bear the sole
responsibility for any resulting injuries or damage.
•
Make sure the enclosures removed for maintenance work or repairs are refitted
before starting the machine.
•
Do not begin any maintenance or set-up work before the machine has been
switched off and has come to a complete standstill.
•
Do not open enclosures, doors or hinged covers before the machine has come
to a complete standstill. Observe all relevant safety procedures.
•
Do not remove, alter or deactivate any machine parts or safety equipment.
•
Only use original BMT spare parts for your machine. We do not undertake any
liability for possible damage caused to the machine as a result of unauthorised
use of non-BMT parts or unauthorised changes/alterations.
•
Keep the working area clean and tidy. Dirt (e.g. oil or dust on the floor) and
obstacles constitute a safety hazard.
•
BMT will not undertake any liability for injuries or damage caused by
misconduct or failure to observe these safety instructions.
•
Make sure that the control voltage is switched off (Master Switch OFF) and
secured against accidental restart before installing and setting up the machine.
