AW00156301000
GigE Starter Kit ace 2 Getting Started Guide
Basler GigE Starter Kit ace 2
1
Basler GigE Starter Kit ace 2
GETTING STARTED GUIDE
Document Number: AW001563
Version: 01 Language: 000 (English)
Release Date: 31 July 2019
Basler AG
An der Strusbek 60–62
22926 Ahrensburg, Germany
All material in this publication is subject to change without notice
and is copyright Basler AG.
Contacting Basler Support Worldwide
Europe, Middle East, Africa
The Americas
Basler AG
Basler Inc.
An der Strusbek 60–62
855 Springdale Drive, Suite 203
22926 Ahrensburg
Exton, PA 19341
Germany
USA
Tel. +49 4102 463 515
Tel. +1 610 280 0171
Fax +49 4102 463 599
Fax +1 610 280 7608
Asia-Pacific
Basler Asia Pte. Ltd.
35 Marsiling Industrial Estate Road 3
#05–06
Singapore 739257
Tel. +65 6367 1355
Fax +65 6367 1255
[email protected]
www.baslerweb.com
1 Introduction
This
Getting Started Guide
considers the components that are
included in the starter kit for one ace 2 GigE camera. The components
are essential for camera operation and are designed for use with a
Basler ace 2 GigE camera only.
The
Getting Started Guide
informs about the scope of delivered
components and provides related precautions. The
Getting Started
Guide
does usually not include detailed specifications and information
about installing and using the components. This information is
available in the user documentation indicated in
of this
document.
2 Scope of Delivered Components
The scope of delivered components is as shown below. Some
components can also be ordered individually (see order numbers in
Table 1).
Fig. 1: Delivered Components; Not to Scale
3 Precautions
<
4 Specifications and Requirements
The
Basler Product Documentation
(BPD) provides
Information for
using the starter kit’s components for camera installation and
operation. This documentation is available on: www.baslerweb.com.
Detailed information for the GigE Cat 6, S/FTP, 2 x RJ-45 cable and
the tripod mount adapter can be downloaded from the Basler website.
Specifications for the power-I/O cable and requirements for the power
supply to be used with the power-I/O cable, are given below.
4.1 Power-I/O Cable Specifications
The power-I/O cable includes an M8 6-pin plug on the camera end and
on the other end a coaxial power plug for the power supply (AUX
power) and an open end for I/O.
For detailed technical information, go to
docs.baslerweb.com
.
Component
Order Number
Cable GigE Cat 6, S/FTP, 2 × RJ-45 (Data)
2000030284
Cable Power-I/O (I/O and AUX Power)
N/A
Tripod Mount ace 2 - Camera Mount Adapter with
Three Screws
2200000314
This Getting Started Guide
N/A
Table 1: Component Names and Related Order Numbers
NOTICE
A damaged cable can cause camera malfunction.
If the GigE data cable or power-I/O cable is damaged, the camera
may not operate as intended.
Avoid for instance the following:
Putting heavy mechanical loads on the cable
Bending to less than the minimum specified radius
Pulling a plug by pulling on the cable
If a cable or cable plug is damaged, stop camera operation and
replace the cable.
NOTICE
An incorrect component can cause camera malfunction.
Do not modify any of the supplied components.
Cable GigE Cat 6, S/FTP, 2 x RJ-45
Tripod mount ace 2
with three screws
Cable power-I/O
Getting Started Guide -
this document
