AW00156301000
GigE Starter Kit ace 2 Getting Started Guide
Basler GigE Starter Kit ace 2
2
Fig. 2: Cable Overview with Dimensions [mm] and Plug Details; Not to Scale
4.2 Power Supply (AUX Power) Requirements
The power supply that you will use to supply AUX power via the
power- I/O cable, must meet the following requirements.
Pin Number
Wire Color
Function
1
AUX power
2
White
Opto-coupled I/O, Line 1
3
Blue
Ground for opto-coupled I/O
4
Black
GPIO I/O, Line 2
5
Gray
GPIO I/O, Line 3
6
Ground for AUX power and GPIO
Table 2: Wiring Information and Pin Assignments
Category
Specification
Max. Operating Voltage
As required and allowed by the
camera: see BPD
Max. Rated Current
1.5 A
Operating Temperature Range
0 °C – 40 °C
Operating Relative Humidity Range;
Non Condensing
20 % – 80 %
Cable Diameter
5.0 mm
Min. Bending Radius (Outer Radius,
Static)
25 mm
Suitable for Drag Chain/Robotics
Applications
No
Connector on Camera Cable End
M8 6-pin plug, male, A coding
Connector on Power Supply End
(AUX Power)
Coaxial power plug,
2.1×5.5×11 mm, female
I/O
Wires
Wires for Pin Numbers 2, 3, 4, 5
No connector, open end
Wire Diameter
0.25 mm
2
Wire Insulation
PP
Outer Jacket
PUR, black
M8
Plug
Min. Number of Mating Cycles
100
Contact Plating
Ni/Au
Insulation Material
TPU
Co-
axial
Power
Plug
Inner Diameter of Shell
5.5 mm
Outer Diameter of Center Pin
2.1 mm
Table 3: Specifications for Power-I/O Cable and Plugs
3070
50
Label
3000
1
2
3
4
5
6
M8 6-pin male plug
Coaxial power plug
5.5
2.1
GND: shell pin
VDC: center pin
VDC: Coaxial power plug:
2.1×5.2×11 mm, female
Category
Requirement
DC Output: Voltage
24 VDC
Max. Rated Power
30 W
Operating Temperature Range
In accord with ranges of
camera and components.
Operating Relative Humidity Range
In accord with ranges of
camera and components.
Receptacle (Interface with Power-I/O
Cable)
Compliant with coaxial power
plug, 2.1×5.5×11 mm female;
see above; center pin: VDC
Safety
Must meet the SELV (Safety
Extra Low Voltage) and LPS
(Limited Power Supply)
requirements.
Protection
Over current, over voltage,
short circuit
Table 4: Power Supply Requirements
