Basler DECS-100, Инструкция по эксплуатации

Страница: 63 / 78

DECS-100 BESTCOMS for Palm OS
®
6-2
Figure 6-2. Select Destination
Directory Screen
Figure 6-5. Installation Complete Screen
Figure 6-3. Modules Selection Screen
Figure 6-4. Select a User Screen
4. Select all of the BESTCOMS files for installation by clicking the Select all button. Click the Next>
button to proceed to the Select a User screen of Figure 6-4.
5. Click the check box next to the desired user or click the Select all button to make BESTCOMS
available to all users. Click the Next> button to complete the installation. The Installation Complete
screen (Figure 6-5) appears and confirms that BESTCOMS was installed successfully. Click the Quit
button to exit the setup utility.
6. Connect your handheld and PC using a HotSync
®
cable or cradle and perform a HotSync
®
operation
to load BESTCOMS on your handheld.
Connecting the DECS-100 and Handheld
Communication between the DECS-100 and your handheld requires the proper connections. A readily
available data cable can be used to connect your handheld to the DECS-100. If a data cable isn’t available,
a 9-pin, male-to-male, null-modem adaptor can be connected in series with a HotSync
®
cable.
STARTING BESTCOMS
BESTCOMS is started by tapping the BESTCOMS icon on the main menu (Figure 6-6) of your handheld. The
BESTCOMS startup screen of Figure 6-7 appears briefly followed by a screen (Figure 6-8) asking you to
select either Off-Line or On-Line operation.
NOTE
Ensure that the handheld is connected to the DECS-100 with the correct cable
before attempting to work in the On-Line mode. If the communication cable is not
connected, the handheld will lock up and require a soft reset.