Basler daA1280-54bc, Руководство пользователя

Страница: 24 / 144

Technical Specifications and Requirements AW00136902000
16 Basler dart BCON
3.4.2 Maximum Lens Dimensions
When mounting a lens on the dart S-mount or CS-mount camera models, observe the following:

The lens must not intrude into the camera body more than the values given below.

The length of the threads on the camera’s lens adapter is 7.5 mm for dart S-mount camera
models and 5.6 mm for dart CS-mount camera models.

For S-mount camera models, Basler recommends attaching an O-ring (Ø11 mm x Ø1.5 mm) to
the S-mount lens. This makes it easier to adjust the lens.

The CS-mount variants of the daA1600-60bm/bc cameras are shipped with a 0.5 mm spacer
ring. The spacer ring optimizes the flange focal distance of these cameras. When mounting a
lens on the camera, attach the spacer ring to the lens.
The maximum lens dimensions are also shown in Figure 12 on page 17 and Figure 13 on page 18 .
Camera Model Lens Adapter
Type
Maximum Allowed
Lens Intrusion
(in mm)
daA1280-54bm
daA2500-14bm
S-mount 11.7
CS-mount 11
daA1280-54bc
daA2500-14bc
S-mount 11.7
CS-mount 7
daA1600-60bm S-mount 10.7
CS-mount 10
daA1600-60bc S-mount 10.7
CS-mount 7
Table 4: Maximum Allowed Lens Intrusion for dart BCON Camera Models
NOTICE
Screwing in the lens too deep can damage camera components.
On S-mount cameras, the lens is screwed in and out to reach the desired level of focus.
S-mount lenses do not have a defined flange and therefore will not stop before they touch (and
possibly scratch or break) the sensor glass.