Basler BE1-87G, Инструкция по эксплуатации

Страница: 5 / 64

9170800990 Rev M BE1-87G Introduction iii
REVISION HISTORY
The following information provides a historical summary of the changes made to the BE1-87G instruction
manual (9170800990). Revisions are listed in reverse chronological order.
Manual
Revision and Date Change
M, 03/10

Changed the sensing input range specifications for pickup accuracy
in Section 1.

Corrected labeling in Figures 4-15 and 5-5.
L, 09/07

Replaced magnetic type targets with electronic type targets.
K, 06/07

Updated power supply burden data and output contact ratings.

Updated front panel illustrations to show laser graphics.

Added dimensional drawings for single-ended cases.

Updated all applicable illustrations to show revised case covers.

Added three-phase sensing connection diagram for delta-connected
machine.

Moved content of Section 6, Maintenance to Section 4.

Moved content of Section 7, Manual Change Information to manual
Introduction.
J, 05/99

Updated format of the manual.

Corrected Figure 1-2.

Corrected terminal numbering reference on page 1-4, last paragraph.

Corrected Figures 4-11 and 4-12.
I

This revision letter not used.
H, 05/96

Added sensing input range 2 (1 Aac nominal) to the available models.

Changed high speed operation from 20 ms to 30 ms.

Changed all connection diagrams to include ground connections,
where applicable.

Added internal connection diagrams.

Corrected Table 1-1.

Clarified setting example for motor differential application.

Added Setting Example #2.

Split Section 4 into two sections. New section is Section 5, Testing
and Setting.
G, 10/91

Added I
2
t rating for stabilizer reactor.

Added Figure 4-1, Stabilizing Reactor Impedance Characteristics.
F, 07/91

Changed pickup accuracy for Ir > 5 A from 30 A,

5% to 20 A,

8% of
the operate pickup characteristic or 150 mA, whichever is greater.
E, 07/91

Modified Figures 1-1 and 1-2.

Added warning information to pages 1-1 and 4-2.
D, 03/91

Removed On/Off switch material.

Added material documenting stabilizing reactor.

Added illustrations for typical connections, sensing input connections,
test setup, extended operational characteristics, and pickup response
timing.

Added table for current sensing burden.

Added relay setting material to Section 5.