manualshive.com logo in svg

Basler BE1-59NC, Инструкция по эксплуатации

Поделиться
Скачать
Basler BE1-59NC Скачать руководство пользователя страница 37

9279400990 Rev B 

BE1-59NC Testing 

5-5 

D2 Timing Option 

Step 1.  With reference to Figure 5-2, set PS1 for the value shown in Table 5-1, input option (column 1) 

and for the specific pickup voltage (column 2, 

Volts Pickup 50/60 Hz

). 

Example:

 input option 1, 

PS1 set to 10 volts, at 0

°

. 

Step 2.  Adjust the OVERVOLTAGE 1 PICKUP adjust potentiometer R63 so the OVERVOLTAGE 1 

PICKUP LED just illuminates. 

Step 3.  Adjust PS1 and PS2 for the voltage levels and phase angles based on input options as shown 

in Table 5-1 (columns 3 and 4). 

Step 4.  Set the OVERVOLTAGE 1 TIME DIAL to 11. 

Step 5.  Reset the timer. Turn on PS1. While monitoring the output terminals indicated in Figure 5-2 for 

OVERVOLTAGE 1, initiate PS2 and record the time delay. Verify that the time is within 5.0% or 
25 milliseconds (whichever is greater) of the time shown in Table 5-1. 

Step 6.  Remove PS1 and PS2 voltage. 

Step 7.  Set the OVERVOLTAGE 1 TIME DIAL to 33. 

Step 8.  Reset the timer. Turn on PS1. While monitoring the output terminals indicated in Figure 5-2 for 

OVERVOLTAGE 1, initiate PS2 and record the time delay. Verify that the time is within 5.0% or 
25 milliseconds (whichever is greater) of the time shown in Table 5-1. 

Step 9.  Remove PS1 and PS2 voltage. 

Step 10.  Set the OVERVOLTAGE 1 TIME DIAL to 88. 

Step 11.  Reset the timer. Turn on PS1. While monitoring the output terminals indicated in Figure 5-2 for 

OVERVOLTAGE 1, initiate PS2 and record the time delay. Verify that the time is within 5.0% or 
25 milliseconds (whichever is greater) of the time shown in Table 5-1. 

Step 12.  Remove PS1 and PS2 voltage. 

Step 13.  With reference to Figure 5-2, set PS1 for the value shown in Table 5-1 and for the specific input 
option. 

Step 14.  Adjust the OVERVOLTAGE 2 PICKUP adjust potentiometer R43 so the OVERVOLTAGE 2 

PICKUP LED just illuminates. 

Step 15  Adjust PS1 and PS2 for the voltage levels and phase angles based on input options as shown 

in Table 5-2. 

Step 16.  Set the OVERVOLTAGE 2 TIME DIAL to 11. 

Step 17.  Reset the timer. Turn on PS1. While monitoring the output terminals indicated in Figure 5-2 for 

OVERVOLTAGE 2, initiate PS2 and record the time delay. Verify that the time is within 5.0% or 
25 milliseconds (whichever is greater) of the time shown in Table 5-1. 

Step 18.  Remove PS1 and PS2 voltage. 

Step 19.  Set the OVERVOLTAGE 2 TIME DIAL to 33. 

Step 20.  Reset the timer. Turn on PS1. While monitoring the output terminals indicated in Figure 5-2 for 

OVERVOLTAGE 2, initiate PS2 and record the time delay. Verify that the time is within 5.0% or 
25 milliseconds (whichever is greater) of the time shown in Table 5-1. 

Step 21.  Remove PS1 and PS2 voltage. 

Step 22.  Set the OVERVOLTAGE 2 TIME DIAL to 88. 

Step 23.  Reset the timer. Turn on PS1. While monitoring the output terminals indicated in Figure 5-2 for 

OVERVOLTAGE 2, initiate PS2 and record the time delay. Verify that the time is within 5.0% or 
25 milliseconds (whichever is greater) of the time shown in Table 5-1. 

Step 24.  Remove PS1 and PS2 voltage. 

NOTE 

In the following inverse time tests, voltage is stepped from one-half of pickup to a 
voltage that is higher (by value in column for Volts Over Pickup, Table 5-1) than 
the pickup. 

Содержание BE1-59NC








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды