Basler A600f, Дополнение к руководству пользователя

Страница: 14 / 18

Supplement
8 Basler A600f Board Level
DRAFT
6 Input Port Electrical Characteristics
A600f Board Level cameras are equipped with two physical input ports designated as Input Port 0
and Input Port 1. The ports are accessed via the 10-pin header on the board. See Table
2 and
Figure 3 for input port pin assignments and pin numbering.
For each port, an input voltage between 0.0 and 1.5 VDC indicates a logical 0. An input voltage
between 3.5 and 5.0 VDC indicates a logical 1.
Typical current draw for the input port is 1 mA.
Figure 6 shows an example of a typical circuit you can use to input a signal into the Board Level
camera.
Figure 6: Typical Input Circuit
Caution!
The pin assignments and the electrical characteristics of the input ports on A600f
Board Level cameras are different from standard A600f cameras. When using a Board
Level camera, you must follow the guidelines in Sections
4 , 6 , and 7 of this supple-
ment. Failure to follow the guidelines will result in severe damage to the Board Level
camera.