Supplement
Basler A600f Board Level
5
DRAFT
4
I/O Port Connector
4.1
I/O Port Connector Location and Pin Numbering
A 10-pin double row straight pin header is used to access the input and output ports on A600f
Board Level cameras. The location and pin numbering of the header is as shown in Figure 3.
Figure 3: I/O Port Connector Location and Pin Numbering
4.2
I/O Port Connector Pin Assignments
The pin assignments for the-10 pin I/O port connector are as shown in the table below.
Pin
Designation
Pin
Designation
1
Output Port 0
6
Not Connected
2
Input Port 0
7
Output Port 3
3
Output Port 1
8
Not Connected
4
Input Port 1
9
Gnd
5
Output Port 2
10
+5 VDC Reference Voltage Out
Table 2: Pin Assignments for the 10-pin I/O Port Connector
Caution!
The pin assignments and the electrical characteristics of the input ports and the output
ports on A600f Board Level cameras are different from standard A600f cameras.
When using a Board Level camera, you must follow the guidelines in Sections
and
of this supplement. Failure to follow the guidelines will result in severe damage
to the Board Level camera.
Содержание A600f
Страница 1: ...USER S MANUAL SUPPLEMENT Document Number DA00078802 Release Date 4 April 2006...
Страница 4: ......
Страница 6: ...Contents II Basler A600f Board Level DRAFT...