24
Press SEL and MOV keys simultaneously to enter the
program mode, set the installation height, full scale, zero scale
and other parameters, then press the SEL button to save.
Then press MOV, SEL simultaneously to return to
measurement status. The meter will display the correct level
value while outputting the correct current signal.
The relevant HART communication parameters can also
be set via the Hart hand-held Communicator.
If there is a measurement error, please refer to the
section "Troubleshooting" below and read through the "
Installation" section again to identify the problem and resolve it,
or consult the manufacturer.
Instrument seal
After the instrument setting is completed and working ,
Tighten the water proof cable gland, the cable is preferably to
bend downwardly , to prevent water infiltration.
Incorrect
Correct
