BASI BUFM660 Series, Руководство пользователя

Страница: 16 / 29

15
distance value
the temperature
Notes:

The instantaneous flow rate will be shown at first after powered on or
exiting from programming mode.

There are two units of measurement on the right side of the panel for
instantaneous flow rate: M
3
/H and L/S, there is “-” symbol point to the
current unit. It can be set up in programming mode with FU00
parameters to choose which unit to be shown.

The unit of measurement for accumulated flow rate is M
3
, and the unit
for liquid level and space is M, the unit for temperature is
℃。

The output current is always corresponding to the instantaneous flow
rate, no matter which value disappears on the panel.

The maximum of accumulated flow rate is 9999999.9m
3
, it will start
from 0 to accumulate again after the maximum.

The accumulated flow rate is saved per minute, it can be set up in
programming mode with FCab parameters to reset or keep continuous
accumulation.

If the symbol “-” on the right side of the LCD display keeps flashing,
that means the communication between the probe and the host is
normal.

If there is no echo, the BUFM660 will show like this.